ALU-SAFE® QV676 430 g/m2 Trousers D3 E3 - 8.2 cal/cm2 CAT 2

ALU-SAFE® QV676 430 g/m2 Trousers D3 E3 - 8.2 cal/cm2 CAT 2

Application: Work wear for the hot metal industry, especially primary Aluminium smelters and downstream Aluminium processors.

PRODUCT DESCRIPTION

ALu-Safe® trouser, HRC 2, ATPV 8.2 cal/cm2.Trouser with two straight side entry pockets, button fly with fastener on waist, half elastic waist back, right leg ruler pocket with flap and Velcro® closure and no back pockets. New "easy fit" design for comfort and a modern appearance.

Enquiry Basket
  • Information
    Colour Grey
    Size S- XL
    Materials

    ALu-Safe® QV 676, 430 g/m2.

    Product Standards

    NFPA 70E(CAT 2); EN ISO 11612:2008 - A1, A2, B1, C1, D3, E3, F1; EN 340:2003; ASTM D3776, D3775, D5034, D1424, D737, D1230, D6413, F1506, D3884, 955-03 and AATCC 135. Garment: CE 0339. ATPV: 8.2 cal/cm2; 2 1 HAF: 77.1%

    Hazard Assessments Molten Aluminium and Cryolite splash, convective heat, radiant heat, flames and the thermal effects of arc flash.
    Product Comments

    WARNING: READ BEFORE USING THIS PRODUCT Arc flash clothing is intended to provide protection from thermal effects of arc flash and this product must be used as part of an appropriate set of PPC and PPE to protect against the hazards of arc flash. This product complies with standards that are intended to protect against arc flash in most situations that arise in normal use. There may be exceptional cases in which even the best protection is not enough to prevent the harm caused by arc flash or the related effects and, although the product meets statutory and industry specifications, the use of this product does not guarantee that the product will provide complete protection in those exceptional cases. If you are in doubt or do not fully understand these limitations, contact the manufacturer for full information. The product may be returned to the supplier if you are not willing to accept a product that is subject to the limitations set out above. 1 ATPV: Arc Thermal Performance Value. The higher the value, the more insulated one is from second degree burn. 2 HAF: Heat Attenuation Factor. The higher the HAF%, the more heat is blocked by the fabric.

  • Product Features
    • Dual protection: Protects against molten metal splash and electric arc flash.
    • Inherently flame-resistant for the life of the garment.
    • Highly moisture absorbent, double that of cotton.
    • Water / machine washable (see care label).
    • Natural fibers.
    • Comfortable to wear.
    • Cool in summer, warm in winter.
    • Quality tailored garment.
  • Downloads
    Alu-Safe Brochure 2017 new.pdf - 9582996 kb Download Now